Adexen Recruitment Agency – Our client, an international Oil & Gas group, is recruiting suitably qualified candidates to fill the position below:
TELECOM SUPERVISOR (ENGINEER)
Job Reference: 1349
Location: Nigeria
JOB DESCRIPTION
To ensure safety of commissioning activities on yard and on site in respect with Company standing instructions and Work Permit instructions.
To ensure that the work identified in the work permit is performed according to company specification.
Take care for the organization of the work such as Logistic, tools, spare parts, authorization…
Safety and Operations Management:
In charge to supervise yard and site execution as described in the Work permit. Ensure that:
The risks and safety precautions highlighted in the work permit are well understood by his team,
Check the place for any additional risks not identified in the work permit and report to his superintendent any hazardous deviation,
Perform pre-job meeting, check that the tools and PPE are in good condition,
Check that all required authorization to perform the job are granted,
Ensure that Company Standing instruction, Site Operating procedure, and additional operating procedure such as SIMOPS are known by the team and enforced,
Ensure that cleaning is done after completion of the work and the place is left safe.
Has full authority to stop the job of any member of his team in case of hazardous situation or unsafe behavior.
Stop any hazardous situation and immediately report to the site RSES.
Commissioning Execution:
Supervise the Witnessing of contractor pre-commissioning activities by his team of technicians, as defined by the superintendent. Ensure that the witnessing is made in a professional way; evaluate the skills of the people performing the pre-commissioning. Ensure that witnessing activities do not delay contractor activities more than necessary.
Manage a small team of technicians to ensure that the work identified in the WP is performed in a professional manner, in respect with company specification.
Evaluate technical skills of his team members and help them to develop their skills on new equipment and technologies
Organize the work and the team to get the job done with quality and avoid waste of time: manpower, logistic, tools, authorization, spare parts, documents…
Raise and clear punch List items. Report any nonconformity to his superintendent.
Validate Commissioning test and check sheets before superintendent approval.
Verifies the quality of his teams’ interventions by frequent on-site checks
Reporting and progress follow up
Report daily activities to the superintendent.
Expectations
Minimum Qualification: Engineer
Education Level: Master’s degree or Higher National Diploma
Experience: 5-10 years in a similar position
Mandatory Competences: Telecom engineering / Oil & Gas Process
Recommended Competences: ICAPS / OPERCOM / Commissioning
MECHANICAL TECHNICIAN
Job Reference: 1347
Location: Nigeria
Function: Technical/technicians
JOB DESCRIPTION
To ensure safety of commissioning activities on yard and on site, by performing activities in respect with Company standing instruction and Work Permit instructions.
To ensure that the work identified in the work permit is performed according to company specification.
Commissioning Execution:
Performs on site the commissioning operations (test and check sheets ) which are placed under his responsibility.
Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to Work Permits)
Witnessing of contractor pre-commissioning activities as defined by the supervisor.
Raise and clear punch List items.
Report any non-conformity to his Supervisor
Report any non-conformity to the discipline Supervisor
Reporting and progress follow up
Report daily activities to the supervisor
Expectations
Minimum Qualification : Technician
Education Level : High school or Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study)
Experience: 3 years in a similar position
Mandatory Competences: English / Mechanical equipment testing
Recommended Competences: Commissioning
Theoretical Knowledge:
Petroleum: Have a basic understanding of facilities / process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia…).
Computer: Be able to produce a report using Microsoft Word; be able to perform simple calculation with Microsoft Excel. Have been introduced to the use of the internet and e-mails.
Physics: Understanding and use of basic laws and units of physic (Newton’s law, forces, mass, energy…). Be knowledgeable of materials / steels characteristics (use, resistance, corrosion and its prevention).
Engineering:
Be able to read and use drawings (P&ID’s, PFD’s, Isometrics), vendor documents (be able to determine tolerance and adjustment figures), name plate and data sheet.
Be able to draw accurate sketches and item to scale.
Equipment:
Understand the working principles of main mechanical equipment: filters, gear boxes, exchangers, air coolers, diesel engine, gas turbines, centrifugal and reciprocating pumps or compressors, common valves types (butterfly, gate, ball, cage and PSV) and hydraulic systems (cranes, HPU, pumps).
Be fully familiar with lubrication requirements and the different type of lubricants.
Practical Skills:
Know how to select, use and maintain all the mechanical hand tools (all types of keys, files, drills, callipers, taps…).
Be able to use measuring tools (micrometer, vernier, gauges…), torque wrench and fastener.
Be able to operate and maintain pneumatic drills or grinders.
Be able to use workshop equipment (pedestal drill, hydraulic press…), in particular machining and tooling.
Know how to use basic lifting gear (chain block, slings…). Be trained to complete simple / basic lifting operation.
PROCESS SUPERVISOR (ENGINEER)
Job Reference: 1348
Location: Nigeria
Industry: Energy / Oil & Gas
Function: Operations & Production
SUMMARY
Our client is recruiting a Process Supervisor for an Oil & Gas offshore project.
JOB DESCRIPTION
To ensure safety of commissioning activities on yard and on site in respect with Company standing instructions and Work Permit instructions.
To ensure that the work identified in the work permit is performed according to company specification.
Take care for the organization of the work such as Logistic, tools, spare parts, authorization…
Safety and Operations Management:
In charge to supervise yard and site execution as described in the Work permit. Ensure that :
The risks and safety precautions highlighted in the work permit are well understood by his team,
Check the place for any additional risks not identified in the work permit and report to his superintendent any hazardous deviation,
Perform pre-job meeting, check that the tools and PPE are in good condition,
Check that all required authorization to perform the job are granted,
Ensure that Company Standing instruction, Site Operating procedure, and additional operating procedure such as SIMOPS are known by the team and enforced,
Ensure that cleaning is done after completion of the work and the place is left safe.
Has full authority to stop the job of any personnel under his work permit in case of hazardous situation or unsafe behavior.
Stop any hazardous situation occurring around and immediately report to the site RSES.
Commissioning Execution:
Supervise the Witnessing of contractor pre-commissioning activities by his team of technicians, as defined by the superintendent.
Ensure that the witnessing is made in a professional way; evaluate the skills of the people performing the pre-commissioning.
Ensure that witnessing activities do not delay contractor activities more than necessary.
Manage the team of Contractor’s technicians and leak test spe…ts to ensure that the work identified in the WP is performed in a professional manner, in respect with company specification.
Organize the work and the team to get the job done with quality and avoid waste of time: manpower, logistic, tools, authorization, spare parts, documents…
Raise and clear punch List items. Report any non-conformity to the discipline leader
Validate Commissioning test and check sheets before superintendent approval.
Verifies the quality of his teams’ interventions by frequent on-site checks
Reporting and Progress Follow up:
Report daily activities to the superintendent.
Follow-up the progress of each piping test-pack by means of specific table, as per Leader requirement
MINIMUM QUALIFICATION
An Engineer, with a Master’s Degree or Higher National Diploma
Experience:
5-10 years in a similar position
Mandatory Competences:
Process engineering / Oil & Gas Process
Recommended Competences:
ICAPS / OPERCOM / Commissioning
MECHANICAL SUPERVISOR (ENGINEER)
Job Reference: 1346
Location: Nigeria
Industry: Energy / Oil & Gas
Function: Operations & Production
SUMMARY
Adexen Recruitment is mandated by an international Oil & Gas group to recruit a Punch List Coordinator for an offshore project.
JOB DESCRIPTION
To ensure safety of commissioning activities on yard and on site in respect with Company standing instructions and Work Permit instructions.
To ensure that the work identified in the work permit is performed according to company specification.
Take care for the organization of the work such as Logistic, tools, spare parts, authorization.
Safety and Operations Management:
In charge to supervise yard and site execution as described in the Work permit. Ensure that :
The risks and safety precautions highlighted in the work permit are well understood by his team,
Check the place for any additional risks not identified in the work permit and report to his superintendent any hazardous deviation,
Perform pre-job meeting, check that the tools and PPE are in good condition,
Check that all required authorization to perform the job are granted,
Ensure that Company Standing instruction, Site Operating procedure, and additional operating procedure such as SIMOPS are known by the team and enforced,
Ensure that cleaning is done after completion of the work and the place is left safe.
Has full authority to stop the job of any member of his team in case of hazardous situation or unsafe behavior.
Stop any hazardous situation and immediately report to the site RSES.
Commissioning Execution:
Supervise the Witnessing of contractor pre-commissioning activities by his team of technicians, as defined by the superintendent. Ensure that the witnessing is made in a professional way; evaluate the skills of the people performing the pre-commissioning. Ensure that witnessing activities do not delay contractor activities more than necessary.
Manage a small team of technicians to ensure that the work identified in the WP is performed in a professional manner, in respect with company specification.
Evaluate technical skills of his team members and help them to develop their skills on new equipment and technologies
Organize the work and the team to get the job done with quality and avoid waste of time: manpower, logistic, tools, authorization, spare parts, documents…
Raise and clear punch List items. Report any nonconformity to his superintendent.
Validate Commissioning test and check sheets before superintendent approval.
Verifies the quality of his teams’ interventions by frequent on-site checks
Reporting and progress follow up:
Report daily activities to the superintendent.
REQUIREMENTS
Minimum Qualification : Engineer
Education Level : Master’s degree or Higher National Diploma
Experience: 5-10 years in a similar position
Mandatory Competences: English / Mechanical engineering / Oil & Gas Process
Recommended Competences:
ICAPS / OPERCOM / Commissioning
INSTRUMENTATION TECHNICIAN
Job Reference: 1345
Location: Nigeria
Function: Technical/technicians
JOB DESCRIPTION
To ensure safety of commissioning activities on yard and on site, by performing activities in respect with Company standing instruction and Work Permit instructions.
To ensure that the work identified in the work permit is performed according to company specification
Commissioning Execution:
Performs on site the commissioning operations (test and check sheets ).
Ensures that the Company’s HSE regulations are respected (especially procedures related to Work Permits)
Witnessing of contractor pre-commissioning activities as defined by the supervisor.
Raise and clear punch List items
Report any non-conformity to his Supervisor
Reporting and progress follow up
Report daily activities to the supervisor
Expectations
Minimum Qualification : Technician
Education Level : High school or Higher National Diploma or Certificate
Experience: 2-5 years in a similar position
Mandatory Competences:
English / Commissioning / Instrumentation & Loop testing/Instrument tools : HART communicator , Druck pump
Recommended Competences:
ICAPS/OPERCOM
Petroleum: Have a basic understanding of facilities / process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia…).
Computer: Be able to produce a report using Microsoft Word; be able to perform simple calculation with Microsoft Excel. Have been introduced to the use of the internet and e-mails.
Physics: Understanding and use of basic laws and units of physic (temperature, pressure, volume, density; specific gravity…).
Engineering:
Be able to read and use drawings (P&ID’s, ESD matrix and loop diagrams), vendor documents, name plate, datasheets. Be knowledgeable of instrument symbols.
Understand regulation principles and be able to analyse them (differentiation in between cascade, split range, simple).
Have a basic understanding of PCS, F&G, and ESD systems. Understand inhibit, alarm and trip concepts.
Equipment:
Understand working principle of basic instruments: level and interface level transmitters, thermocouples, manometers, vibration probes, metering devices (orifice plate, coriolis, turbine, volumetric)…
Understand manual and automatic valves (including PSV) principle and command (positioner…).
Be familiar with all types of F&G detection (fusible loop, UV/IR, gas, smoke);
Know how to select and use the necessary hand tools.
Correct use and handling of tubing, compression fittings, gaskets, “O” rings, cable glands…
Correct use and handling of multimeters, calibration unit, hydraulic pumps, temperature bath, smart calibrator.
TO APPLY
Click on Job Title below:
TELECOM SUPERVISOR (ENGINEER)
MECHANICAL TECHNICIAN
PROCESS SUPERVISOR (ENGINEER)
MECHANICAL SUPERVISOR (ENGINEER)
INSTRUMENTATION TECHNICIAN
Latest Recruitment at an Oil and Gas Firm – Adexen Recruitment Agency, Thursday 16, November 2017
No comments:
Post a Comment