A reputable Oil and Gas Servicing company, a lead contractor to all the IOCs, is hereby recruiting into the underlisted job position:
Job Title: Crane Operator
Location: Nigeria
Job Role
- Operate crane under general supervision
- Manipulate or depress crane controls to regulate speed and direction of crane and hoist movement according to written, verbal or signal instructions
- Repair crane as needed
- Inspect crane for safety issues on a daily basis
- Determine if any parts are malfunctioning
- Complete job tickets, service quality summaries and all the necessary paperwork
- Lift, position and place machinery, equipment or other large objects at construction sites and industrial facilities
- Drive trucks to worksites and unload trucks
- Place blocks and outriggers to prevent capsizing when lifting loads
- Move levers and pedals to rotate crane or chassis to raise and lower crane boom and raise lower load-line
- Bolt boom sections together to extend or modify boom for pile driving or high lifting
- Work with in precise limits and standards of accuracy
- Operate crane according to signals from helper
- Start and stop crane engine
- Follow directions carefully etc.
Requirements
- Degree in Engineering, API RP 2D, LEEA 1-3 and relevant certifications.
- Age limit: 25 – 35 years.
- Minimum required experience: 3 years.
Job Title: Rigger
Location: Nigeria
Job Role
- Align, level and anchor machinery
- Attach loads to rigging to provide support or prepare them for moving using hand and power tools
- Attach pulleys and blocks to fixed overhead structures such as beams, ceiling and gin pole booms, using bolts and clamps
- Control movement of heavy equipment through narrow openings or confirmed spaces, using chianfalls, gin poles, gallows frames and other equipment
- Dismantle and store rigging equipment after use
- Fabricate, set up and repair rigging support structures, hoists and pulling gear, using hand and power tools
- Manipulate rigging lines, hoists and pulling gear to move or support materials such as heavy equipment, ships or theatrical sets
- Select gear such as cables, pulleys and winches according to load wights and sizes, facilities and work schedules
- Signal or verbally direct workers engaged in hoisting and moving loads, in order to ensure safety of workers and materials
- Testing rigging to ensure safety and reliability
- Tilt, dip and turn suspended loads to maneuver over, under and/or around obstacles, using multi-point suspension techniques
- Install ground rigging for yarding lines, attaching chokers to logs and then to the lines
Requirements
- Degree in Engineering, API RP 2D, LEEA 1-3 and relevant certifications
- Age limit: 25 – 35 years
- Minimum required experience: 3 years
Job Title: Material Coordinator
Location: Nigeria
Job Role
- Coordinate and expedites flow of materials, parts and assemblies between sections or departments according to production and shipping schedules or department priorities and complies and maintains manual or computerized records: Review productions schedules and related information and confers with department supervisors to determine material requirements to identify overdue materials and to track materials
- Requisitions materials and and establish sequential delivery dates to department according to job order priorities and material availability
- Examines material delivered to production department to verify conformance to specifications
- Arranges in-plant transfer of materials to meet production schedules
- Computes amount of material required to complete job orders, applying knowledge of products and manufacturing processes
- Compiles and maintain manual or computerized records such as material inventory, in-process production reports and status and location of materials
- May move or transport materials from one department to another, manually or using material handling equipment
- May arrange for repair and assembly of material or part. May monitor and control movement of materials and parts on automated conveyor system
Requirements
- Degree in Engineering or any Science-related fields and relevant certifications
- Age limit: 25 – 35 years
- Minimum required experience: 3 years
Job Title: Test Engineer
Location: Nigeria
Job Role
- Carryout certification, inspection, preventive routine and breakdown maintenance on all the company’s crane (mobile & static) hoists, winches and davits onshore and offshore to API and/or other applicable standards relevant to the specific equipment.
- Provide Engineering support from home office upon request for total crane replacement or refurbishment
- Perform inspection and maintenance duties through the company locations on mobile cranes, static cranes, portable chain and cable hoisting equipment, gantry cranes, forklift, man lifts and survival capsule winches.
- Provide ad-hoc inspections on contractor cranes and lift barges upon request
- Provide training and certification to maintenance personnel, crane operators, riggers and signalmen as required by company
- Work with company maintenance support group and other internal group to institutionalize crane operator and rigger standards and procedures in all the company locations
- Submit reports on all activities, survey, inspections certifications, maintenance etc at a frequency to be set aside by the company
- Repairs ad replacement of hoist and structural components including complete machine overhaul and refurbishment
- Troubleshooting and maintenance of all associated electrical equipment and hydraulic systems
- Provision of technical expertise to handle all technical queries
- Load testing inspections and certification on the company cranes and other lifting equipment
- Maintaining a color coding system for all lifting equipment and containers
- Testing and marking of escape ropes and accessories.
Requirements
- Degree in Engineering, API RP 2D certified, LEEA 1-3 and relevant certifications
- Age limit: 25 – 35 years
- Minimum required experience: 3 years
Job Title: Crane Technician
Location: Nigeria
Job Role
- Carryout certification, inspection, preventive routine and breakdown maintenance on all the company’s crane (mobile & static) hoists, winches and davits onshore and offshore to API and/or other applicable standards relevant to the specific equipment.
- Provide Engineering support from home office upon request for total crane replacement or refurbishment
- Perform inspection and maintenance duties through the company locations on mobile cranes, static cranes, portable chain and cable hoisting equipment, gantry cranes, forklift, man lifts and survival capsule winches.
- Provide ad-hoc inspections on contractor cranes and lift barges upon request
- Provide training and certification to maintenance personnel, crane operators, riggers and signalmen as required by company
- Work with company maintenance support group and other internal group to institutionalize crane operator and rigger standards and procedures in all the company locations
- Submit reports on all activities, survey, inspections certifications, maintenance etc at a frequency to be set aside by the company
- Repairs ad replacement of hoist and structural components including complete machine overhaul and refurbishment
- Troubleshooting and maintenance of all associated electrical equipment and hydraulic systems
- Provision of technical expertise to handle all technical queries
- Load testing inspections and certification on the company cranes and other lifting equipment
- Maintaining a color coding system for all lifting equipment and containers
- Testing and marking of escape ropes and accessories.
Requirements
- Degree in Engineering, API RP 2D certified, LEEA 1-3 and relevant certifications
- Age limit: 25 – 35 years
- Minimum required experience: 3 years
Job Title: Hoist Team Lead (Coordinator)
Location: Nigeria
Job Role
- Detailed knowledge of Crane Mechanics, its operations and overall functions
- Detailed Knowledge of Project Management
- There is a requirement for demonstrated leadership, adaptability, teamwork, excellent communication skills in English and commitment to high safety and ethical standards etc.
Requirements
- Degree in Engineering and relevant certifications
- Age limit: 25 – 40 years
- Minimum required experience: 5 years
How to Apply
Interested and qualified candidates should send their CV’s and covering letter indicating the job post applied for to: [email protected]
Application Closing Date
19th September, 2016.
Note: Only shortlisted candidates will be contacted.
Fresh Job Vacancies at a Reputable Oil and Gas Servicing Company [6 Positions]
No comments:
Post a Comment