Showing posts with label Electrical Job Recruitment. Show all posts
Showing posts with label Electrical Job Recruitment. Show all posts

Friday, February 9, 2018

How to Test Electrical Ring Main Circuits

The UK was the first and is now is probably the only country in the world which still uses the 30 amp ring system for wiring socket outlets in electrical installations. The ring main circuit has long been the subject of many a heated discussion between electrical experts, but as an electrician you’ll no doubt need to test them in the course of your duties. Here is an overview of Ring Main inspection and testing procedures.


Warning- Please note that this is a ‘dead’ test so the distribution board, consumer unit or circuit must be isolated from the electrical supply. To begin with you’ll need to carry out a Safe Isolation Procedure and get permission to turn off the supply.


Here’s the testing procedure:


Insulation Resistance


Disconnect all appliances and accessories from the ring circuit and carry out insulation tests between the Line, Neutral and Earth CPC.


End to End Ring Continuity Test


Set your test meter to low resistance range and ‘zero’ the test leads. Measure the resistance of ring continuity of each of the live, neutral and earth conductor ring loops. Record these end to end readings for future reference and entering onto a test sheet. Note that where the earth conductors are smaller, the resistance will obviously be higher. For example for twin and earth cables 1.5mm will be 1.66 times higher than 2.5mm.


Super Loop Test L&N


Cross connect the live and neutral conductors from opposite ends of the ring and to form a super loop. If at first this sounds confusing, try drawing the live and neutral loops of a ring circuit on a piece of paper with the opposite ends connected. You’ll see that it forms one big super loop.


Test resistance between the ends you have just connected together. The reading taken between the super loop ends should be about half that of your previous continuity reading. You can then verify the ring main wiring and connections by going to each socket outlet and testing between live and neutral. Where the socket is on the ring and the connections are ‘good’, your readings should be within 0.05 of your original super loop reading at the distribution board.


These readings are not normally recorded but will form the basis for your assessment of the ring main circuit connections.


High readings could indicate that the socket is on a spur from the ring, that connections need tightening or that the socket is faulty giving a poor connection to the plug and needs replacing. Where the readings are not consistent this could indicate that there are cross connections and the ring circuit has been bridged.


Super Loop Test L&E


Cross connect the line and earth conductors from opposite ends of the ring and to form a super loop. Test between the two sets of ends you have just connected together. The resistance reading should be about half that of your previous continuity reading. You can then verify the ring main wiring and connections by measuring the resistance at each socket outlet as for Live and Neutral described previously. Testing between live and earth at the sockets also checks for correct polarity.




Jobs in Nigeria






How to Test Electrical Ring Main Circuits

Veripark Software Solutions Career Opportunities [3 Positions]


Veripark Software Solutions with a human capital of over 500 well qualified resources, having offices in Istanbul, Dubai, Bahrain, KSA, India, Pakistan, Malaysia, UK & Europe is a globally leading Software Solutions provider specialized in Banking & Financial applications such as Internet banking, loan origination and CRM applications, to mention a few.


Veripark is uniquely organized by industry practices in the Information Technology domain to ensure that our Relationship and Delivery team have in-depth understanding of our business. This has been reiterated by the fact that our customers continue to extend the relationship beyond existing and established borders.


As part of our expansion plan, we are strengthening our team in Lagos, Nigeria.


Job Title: Technical HR Recruiter
Job Location: Lagos, Nigeria
Job Description
We’re looking for a Technical HR Recruiter person who is experienced in hiring software developers and Technical consultants
Job Details
The position has the following job description:



  • Minimum FIVE years of Recruitment experience in IT industry

  • Identify potential candidates through headhunting, networking and through references,

  • Shortlist profiles based on the requirements of the position

  • Conduct technical tests and evaluate the test solutions,

  • Perform initial interview to be conducted for developers

  • Carry out the hiring process


Requirements



  • The ideal candidate should have experience in software developer/CRM Technical consultants / Project Managers hiring and hired tons of developers earlier.


Experience


Education Requirement 



  • Bachelor’s Degree – any


 


Job Title: Senior .NET Developer
Job Location: Lagos, Nigeria
Job Description
We are looking for results-driven team leaders and software architects with minimum 6-8 years of experience in banking especially in Internet banking, CRM, loan origination applications.
Job Details
We are looking for the following qualifications:



  •  Minimum SIX TO EIGHT years of web-based application development experience,

  • At least THREE YEARS of development experience in a banking project,

  •  Have experience in leading development teams and task assignment,

  •  Have experience in developing technical design documents,

  •  Knowledge in application security, scalability and high-performance database programming,

  • Experience in C#, ASP.NET, SQL Server, ADO.NET,

  • Communication skills in English (listening, speaking and writing),

  • Ability to work on client projects on client premises,

  • Ability to travel to for project assignments in various countries.

  • Business know how on retail and corporate banking is preferred


Experience


Education Requirement



  • Bachelor’s Degree – Computer Science, Electrical Engineering, Electronics/Telecommunication


 


Job Title: Microsoft Dynamics CRM Technical Consultant
Job Location: Lagos, Nigeria
Job Description
We are looking for creative and results driven CRM developers / MS Dynamics CRM Technical consultants to take part in our projects in Dubai and GCC region.
Job Details :
We are looking for the following qualifications:



  • Dynamics CRM experience in an enterprise customer with at least 50 users is required,

  • Minimum 5 years of experience is required,

  • Ability to develop workflows, plug-ins and can do entity modifications,

  • Minimum three years of web based application development experience,

  • Business know how on banking is preferred,

  • Experience in CRM SDK, C#, ASP.NET, SQL Server 2005, ADO.NET

  • Ability to work on client projects on client premises,

  • Ability to travel to for project assignments in various countries.


Experience


Education Requirement



  • Bachelor’s Degree – Computer Science / Electrical Engineering / Electronics & Telecommunications


How to Apply
All profiles to be forwarded to email –  [email protected]


Application Deadline: 8th April 2018






Jobs in Nigeria






Veripark Software Solutions Career Opportunities [3 Positions]

Thursday, February 8, 2018

Job Opportunities at Guinness Nigeria Plc, Thursday 8, February 2018

Guinness Nigeria Plc is a major market for Diageo: Guinness Nigeria operates in the unique and fast growing alcohol industry of over 15mhl beer potential. It is the only company that does Total Beverage Alcohol (TBA) in Nigeria. It’s an on trade dominated market but with a fast growing off trade channel.



MAINTENANCE PLANNER


AutoReqId: 60563BR

Location: Benin, Edo

Level: 6A

Reports To:  Asset Care Manager



CONTEXT OF THE ROLE


Nigeria is currently the world’s third largest market for the Guinness Brand. GNPLC has made large capital investments in recent years, resulting in the sites having both new and ageing assets and technology.

The role involves providing high focus on maintenance activities, to assist with driving performance to World Class Standards.

The role holder will be responsible for ensuring all assets are included and maintained within a formal, structured Planned Maintenance System.


PURPOSE OF THE ROLE

Plans, organizes, directs, controls, administers and supervises execution of the Planned Maintenance System, contributing to the enhancement in machine performance, reduction in unplanned machine stoppages and optimal utilization of available manpower for their area.

Execute the company maintenance strategy and procedures in response to plant performance and failures, in accordance with industry best practice and WCM.


Market Complexity:

The Nigerian beer market is very complex with many competitors and a strong quality, cost and delivery focus.

There is a need to constantly reduce cost of maintenance, while improving plant availability & reliability


TOP ACCOUNTABILITIES

Manage routine/weekly Planned Maintenance activities for their area/line by:


Develop project plan.

Raising work orders

Planning Resources

Managing spares availability (reservations)

Reporting against KPIs

Running reports on specified modules

Support management of shutdown Planned Maintenance activities for all equipment and labour in their area/line, including ordering spares, progress chasing spares, issuing work orders, assembling parts packages and closing all work orders on completion.

Tracking, reviewing and reporting of all maintenance activities against agreed KPIs and compliance requirements and maintenance data analysis and reporting.

Manage and Maintain CMMS maintenance data, including rotables, equipment details and work order feedback.

Facilitate the development of reliability based maintenance system.


QUALIFICATIONS AND EXPERIENCE

3-4 years’ experience in a Brewery or FMCG manufacturing environment

Proficient in the use of CMMS and maintenance systems, preferably Maximo/SAP with some knowledge of engineering spares transactions and stores management.

Good understanding of the fundamental principles of Reliability Centred Maintenance (RCM) and its application in a manufacturing industry, and knowledgeable in the theory and practice of BCM, Root Cause analysis and problem solving techniques.

Effective project management, time management and prioritization skills, and able to interpret engineering information and issue effective reports.

Conversant with GNPLC health, safety, environment & hygiene policies.

Has good interpersonal and communication skills and able to influence maintenance culture positively towards the site vision.

Bachelor’s degree or HND in Engineering, preferably NSE accredited. Master’s degree is an added advantage.


AUTOMATION ENGINEER


AutoReqId: 60564BR

Location: Benin, Edo

Level: 6A

Reports To:  Asset Care Manager



CONTEXT OF THE ROLE


The role of automation engineer (Packaging) is responsible for driving and embedding best in class asset care and maintenance systems for all electrical and automation/electronics machinery on the hi-tech packaging lines.

Expertise in the electrical/electronics/automation engineering is a rare and scarce resource in Nigeria and there is high level of competition amongst oil, gas, telecom and manufacturing industries for the few engineers who spe…ed in this area.

GN strive to recruit, retain the very best of spe…t engineers in packaging to maintain and consistently deliver best in class electrical, electronics and automation systems to guarantee reliability and consistent performance of the lines.


PURPOSE OF THE ROLE

Lead and manage electrical, electronics and automation systems in the Brewery packaging lines to ensure maximum plant availability

Complements the Mechanical Engineering team on the packaging lines to ensure optimum output.

Plant maintenance of all PLCs and SCADA Systems on Planned Maintenance basis.

Plant maintenance High & Low Voltage electrical Systems in the Brewery Packaging lines.

Maintain all Electrical Drives and controls on the packaging.

Resolve all electrical/electronics/automation breakdowns and issues on the packaging lines.


TOP ACCOUNTABILITIES

Drives the planned maintenance programme for all electrical, electronics and automation systems on the packaging lines – Benin has 4 packaging lines and Ogba 3 packaging lines.

Influence the choice of new technology adopted in all future packaging machines and plants.

Accountable for the routine maintenance of various hi-tech packaging equipment including Programmable Logic Computers (PLC) and SCADA systems on the Brewery packaging lines.

Identify and delivers all training needs for the electrical and electronics technicians on the job and coaching for identified instrumentation skill gaps.

Resolves all Automation and Electrical related tasks and breakdowns on the packaging lines to guarantee plant availability to deliver target volumes on an ongoing basis.

Maintain and execute audit plans for all statutory regulations and engineering standards for all Electrical and Automation Systems in packaging.



QUALIFICATIONS AND EXPERIENCE


HND/University Degree in Electrical/Electronics Engineering. Master’s degree and/or professional membership with Nigerian Society of Engineers (COREN) may be an added advantage.

3-5 years’ experience in a brewing or FMCG manufacturing environment directly supporting Electrics, automation and PLC (Siemens Experience Preferred), SCADA and DCS.

Deep knowledge of new and evolving technology and wide range SCADA system versions and their applications with detailed knowledge of PLC Steps 5 and 7 and Programming.

Enhanced skills on Brewery HV/LV distribution systems and electrical drives control automation systems.

Working knowledge of Permit to Work (PTW) systems, with good asset care management skills


TO APPLY

Click on Job Title below:


MAINTENANCE PLANNER

AUTOMATION ENGINEER




Jobs in Nigeria






Job Opportunities at Guinness Nigeria Plc, Thursday 8, February 2018

Wednesday, February 7, 2018

Giant Beverages Current Opportunities Available - Apply Now!


Giant Beverages Limited is a new manufacturing company engaged in the production of natural and healthy non-alcoholic beverages. As a corporate entity, we produce products of the highest quality and are committed to delivering quality service to our customers. Giant Beverages drinks are produced with the finest natural ingredients to meet high-quality standards.


We are recruiting to fill the position below:


Job Title: Production Technician
Location: 
Lagos
Job Description



  • Operate filler

  • Adjust filler height adjustment and transfer alignment.

  • Clean, lubricate and make adjustments or repair to machine such as opening valve, switch levers, sliding disc etc.

  • Replacing of broken leaf springs, shaft axels, pressure piece, actuating shaft, etc.

  • Carry out overhaul and preventive maintenance on machine.

  • Adjust machine components, machine tension and pressure according to size of the bottle.

  • Observe machine operations to ensure quality and conformity of packaged product to standard.

  • Adjust machine when malfunction occurs, clear machine jam and report machine status.


Pet Blowing Machine:



  • Operate the rotary blowing machine

  • Carry out overhaul and preventive maintenance.

  • Ensure good bottles are blown out for production.

  • Control oven temperature and blowing parameters.

  • Adjust machine components to regulate speed, pressure and temperature for proper distribution of material.

  • Clear jam and remove defective or substandard materials or products.

  • Disassemble equipment to repair it or replace parts such as nozzles, mandrel or spindle, etc.

  • Carry out a changeover procedure for packages.

  • Lubricating bearings and mold station.

  • Cleaning of mold stations and heater boxes in the oven.

  • Check all heating mandrels, gripper heads and blowing nozzle for damage.

  • Check gear box oil of the machine main drive.


Qualification and Experience



  • OND in Mechanical/Electrical and Completion of a Craft Apprenticeship, or an equivalent number of years of experience.

  • Production maintenance experience should be an added advantage.


How to Apply
Interested and qualified candidates should send their Application Letter and CV’s to: [email protected]


Application Deadline  9th February, 2018.






Jobs in Nigeria






Giant Beverages Current Opportunities Available - Apply Now!

Tuesday, February 6, 2018

Vacancies at Tetra Pak, Tuesday 6, February 2018

Conventional milk cartons are an unbreakable improvement over glass milk bottles, but the introduction of the Tetra Pak aseptic beverage container in the late 1950’s was revolutionary for the food and beverage industries. Tetra Pak — which takes its name from the original tetrahedron-shaped cartons it developed — manufactures and markets food packaging containers, filling systems, and distribution equipment for industrial customers in more than 170 countries. Its coated-paperboard boxes are used to hold dry, wet, cold, and shelf-stable foods and beverages. The privately-owned company is the largest subsidiary of holding company Tetra Laval International.


PROCESSING FIELD SERVICE COORDINATOR


DESCRIPTION

Tetra Pak West Africa is seeking an independent & highly motivated Processing Field Service Coordinator for our Field Service Operations team in Processing. The ideal individual must have solid field service and management/leadership experience.


The successful candidate will be based in Lagos, Nigeria and will report to the Field Services Manager who is based in Johannesburg, South Africa.


The role responsibilities include:

Drives the effective scheduling, planning and utilisation of technical resources in the local market

Drive the resource planning & coordination and execution of planned and corrective maintenance, as well as certain installation projects

Drive growth, profitability and capabilities in the Tetra Pak Services (Processing) business

Drives quick issue resolution and ensures that other FSE’s are supported where needed

Manage customer relations of the business in the market area

Deploy the full Tetra Pak Services portfolio


QUALIFICATIONS AND SKILL REQUIREMENTS INCLUDE:

Bachelor’s degree in Mechanical engineering

Technical trade qualification is a plus (e.g. Millwright trade test)

Minimum 5 years experience as a Service Engineer

Minimum 5 years of front line experience with customers

At least 2 years of Team leadership experience essential

Strong planning skills

Automation experience required (knowledge of PLC)

Industry experience in Food Processing required

Strong technical knowledge of equipment

Strong productivity and continuous improvement focus

Understanding of maintenance and reliability concepts

Demonstrated Leadership elements of Change, Collaboration and Engagement

Negotiation Skills

Customer focused attitude

Excellent communication skills – must be fluent in English

Result oriented, team player, accountable

Ability to work independently and handle /drive change

Drivers license and valid passport required – must be willing to travel


GRADUATE TRAINEE – FUTURE TALENT FIELD SERVICE ENGINEER


DESCRIPTION

Future Talent Programme Technical Track – Field Service Engineer x 2


Would you like to start your career “in good company”? We are looking for talented and highly motivated new graduates to join our talent programme and become the next generation of leaders in our industry.


Our Future Talent Programme – Technical Track is a 1-year programme that will develop your engineering skills and bring you leading technical knowledge in an accelerated way.


From day one, you’ll be delivering results as part of the team and hold an actual position. Your manager will plan the content of your programme and support you in your development journey. You will work in various parts of Tetra Pak and gain experience from a network of Colleagues all over the world. And that is just the beginning of your Tetra Pak career. After the programme finishes you will have gained valuable experience to help you continue your exciting career within our company.


Role responsibilities will include:

Participate in preparing customer site for installation events, assembling machines.

Participate in execution of preventive maintenance activities.

Inform relevant Tetra Pak staff in a timely manner about discovered Technical Issues.

Participate in the installation of relevant rebuilding/upgrade kits.

Inform relevant Tetra Pak Field Staff about ongoing service activities as well as of any issues affecting the customer or the quality of Tetra Pak service.

Act as an ambassador for Tetra Pak at all times, ensuring good working relationships with the customer and Tetra Pak colleagues and that Tetra Pak’s reputation is sustained.

Execute all work in accordance with Tetra Pak and Customer safety regulations and requirements. Execute all work in accordance with Tetra Pak standards and requirements regarding product quality and food safety. Escalate all  discovered food safety, quality assurance and regulatory issues.

Comply with all reporting requirements.


QUALIFICATIONS

University Degree in Mechanical or Electrical Engineering

Recently graduated in year 2016/2017

Attitude and Flexibility is key – must be willing to work long hours, overtime, weekends, public holidays and away from home (ad hocly as per customer requirements)

Extensive travelling – internationally and locally

Valid Passport and Drivers License is required

The Programme starts in September 2018 in line with global location targets. The position is located in Lagos,Nigeria but you should be able to relocate and willing to travel.


TO APPLY

Click on Job Title below:


PROCESSING FIELD SERVICE COORDINATOR

GRADUATE TRAINEE – FUTURE TALENT FIELD SERVICE ENGINEER


DUE DATE: 7 February, 2018




Jobs in Nigeria






Vacancies at Tetra Pak, Tuesday 6, February 2018

Friday, February 2, 2018

Vacancies at Imisi Partners, Friday 2, February 2018

Imisi Partners is an Africa focused business development company (BDC) with offices in Istanbul and Lagos. Our firm is essentially a hybrid between a traditional investment company and an operating company.


We make investments in private, or in some cases public companies, typically with lower trading volumes, with an investment objective of providing for the possibility of capital appreciation and current income. We hope our stakes in the businesses will increase in value as the business grows. We also loan money to small enterprises and offer consulting for a fee. Our firm is essentially a hybrid between a traditional investment company and an operating company. We represent a transparent portfolio of loans, similar in some sense to private equity or venture capital.


CLINICAL MAINTENANCE ENGINEER


DETAILS:

The Maintenance Engineer reports to the Chief Engineer and maintains a working relationship with and takes direction from all Property Managers in his/her area for issues affecting their properties.

Issues may range from tenant improvement work to preventive maintenance and repair of all building systems.

The Maintenance Engineer must exhibit outstanding client service and professionalism in all interactions with tenants and RMR staff.

Teamwork and collaboration are critical to this positions success.


RESPONSIBILITIES:

Operates, maintains and logs all HVAC and MEP equipment under the direction of their supervisor.

Complete tenant service requests and develops and maintains positive tenant relations through prompt, courteous response to tenant requests.

Perform preventive maintenance on HVAC equipment, plumbing and electrical systems, as directed by their supervisor. Maintain computerized or manual equipment logs that detail preventive work performed.

Clean and paint equipment and surrounding areas relating to equipment and equipment rooms.

Assists in the ordering of stock and inventory of parts and supplies as needed.

Take meter readings on all meters and equipment as directed by their supervisor.

Make required repairs to all building systems. Perform minor repairs on doors, hardware, locks, windows, ceilings, and floors. Daily communication with property management, engineering staff, security, tenants and contractors/vendors is vital.


REQUIREMENTS:

High school diploma or GED equivalent is required.

Minimum one year of direct experience in the management of mechanical, electrical and plumbing operations for commercial office or retail buildings is preferred.

Applicable military experience or other related operations experience will be considered including power plants, multi-family, hotels, hospitals, facilities, etc.

Experience with painting, carpentry and cleaning is required.

Manage own time on a daily basis with little supervision as well as the ability to work collaboratively as part of a team.

May be required to work extended periods of time without relief, when responding to priority/emergency situations (including overtime-type assignments).

Stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. of equipment (pump, tools, ladders) and ability to safely install rigging/lifting device.

Lift and carry objects of up to 50 lbs. for distances of up to 30 feet.

Climb ladders and stairs. Must be available to work flexible schedule including some weekends, evenings, and some holidays. Expected to share on-call responsibilities.

Must be available to work overtime hours, as needed. Excellent client service skills.

Ability to work in a fast-paced environment, with the ability to multi-task and meet deadlines. Must be team oriented and a problem solver.

Strong verbal and written communication skills.

Maintains professional appearance and manner at all times.

Will be required to perform off site duties through the use of a personal vehicle. Must have a valid driver’s license.

If, at any time, security clearance is required for your job (e.g. you are assigned to work at a property leased by the Federal government), being awarded such clearance will be a condition of your employment.


CLEANER


DETAILS:

Perform heavy cleaning duties, such as cleaning floors, washing walls and glass, and removing rubbish.


RESPONSIBILITIES:

Clean building floors by sweeping, mopping, scrubbing, or vacuuming them.

Gather and empty trash.

Clean and polish furniture and fixtures.

Clean windows, glass partitions, and mirrors, using soapy water or other cleaners, sponges, and squeegees.

Dust furniture, walls, machines, and equipment.

Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications.

Steam-clean or shampoo carpets.

Strip, seal, finish, and polish floors.

Follow procedures for the use of chemical cleaners and power equipment, in order to prevent damage to floors and fixtures.

Notify managers concerning the need for major repairs or additions to building operating systems.


QUALIFICATIONS:

Should be able to perform in a manner displaying excellent attitude, enthusiasm and guest service

Ability to lift items that weigh 25 – 35 lbs.

Must be detail-oriented and have ability to multi-task

Must have ability to prioritize and organize work

Ability to work well with others

Capable of lifting, bending, stooping, pushing & pulling heavy loads

Flexible schedule required, including a willingness to work AM/PM shifts, weekends and holidays


TO APPLY

Applicants should send CVs to office@imisipartners.com




Jobs in Nigeria






Vacancies at Imisi Partners, Friday 2, February 2018

Production Technicians at Nestle Nigeria Plc, Friday 2,February 2018

Nestle Nigeria Plc with a presence in more than 130 countries and factories in more than 80 research centres

brings many global benefits. We believe in long term career development and appreciate how challenges and motivation will help you reach your potential. Nestle Nigeria Plc upholds the principle of Non- Discrimination and Equal Employment Opportunities in its recruitment processes.


PRODUCTION TECHNICIAN

LOCATION: 
Agbara, Ogun


RESPONSIBILITIES

Carrying out all line operation, troubleshooting and repairs

Carrying out quality checks (PRPs and OPRPs) as stipulated in the Quality Management System before, during and after operations

Participating in planning and execution of preventive and corrective maintenance activities

Adhering to and following defined operational standards

Ensuring safety of self, product, workplace and colleagues while also ensuring control of the impact of this activities on the environment

Maintaining food safety awareness and its relevance, in order to ensure strict compliance in the workplace.


REQUIREMENTS

Ordinary National Diploma in Electrical / Mechanical Engineering with a minimum of lower credit

At least, 2 years relevant work experience

Minimum of five (5) credits including English language and Mathematics in SSCE/NECO or its equivalent (Not more than 2 sittings)

Computer literacy (MS office applications)

Good communication skills (oral and written)

Good organizational and interpersonal skills.



TO APPLY


Applicants should send their CV’s and completed “MS Excel format” below to:factory.recruitment@ng.nestle.com


Excel Format

Title | Surname | Other Names | Age (as at 1st Jan. 2018 | Basic Qualification (e.g SSCE/NECO) | Other Qualification(s) e.g OND l Phone No l Years of experience l Place of previous employment | Email address |


Note


Only short-listed candidates will be contacted.

Candidates who have applied to this position within the last 60 days need not apply


DUE DATE: 12 February, 2018




Jobs in Nigeria






Production Technicians at Nestle Nigeria Plc, Friday 2,February 2018

Thursday, February 1, 2018

Imisi Partners New Ongoing Recruitment [4 Positions]


Imisi Partners is an Africa focused business development company (BDC) with offices in Istanbul and Lagos. Our firm is essentially a hybrid between a traditional investment company and an operating company. We make investments in private, or in some cases public companies, typically with lower trading volumes, with an investment objective of providing for the possibility of capital appreciation and current income.


We are recruiting to fill the positions below:


Job Title: Clinical Maintenance Engineer
Location
: Lagos
Details



  • The Maintenance Engineer reports to the Chief Engineer and maintains a working relationship with and takes direction from all Property Managers in his/her area for issues affecting their properties.

  • Issues may range from tenant improvement work to preventive maintenance and repair of all building systems.

  • The Maintenance Engineer must exhibit outstanding client service and professionalism in all interactions with tenants and RMR staff.

  • Teamwork and collaboration are critical to this positions success.


Responsibilities



  • Operates, maintains and logs all HVAC and MEP equipment under the direction of their supervisor.

  • Complete tenant service requests and develops and maintains positive tenant relations through prompt, courteous response to tenant requests.

  • Perform preventive maintenance on HVAC equipment, plumbing and electrical systems, as directed by their supervisor. Maintain computerized or manual equipment logs that detail preventive work performed.

  • Clean and paint equipment and surrounding areas relating to equipment and equipment rooms.

  • Assists in the ordering of stock and inventory of parts and supplies as needed.

  • Take meter readings on all meters and equipment as directed by their supervisor.

  • Make required repairs to all building systems. Perform minor repairs on doors, hardware, locks, windows, ceilings, and floors. Daily communication with property management, engineering staff, security, tenants and contractors/vendors is vital.


Requirements



  • High School Diploma or GED equivalent is required.

  • Minimum one year of direct experience in the management of mechanical, electrical and plumbing operations for commercial office or retail buildings is preferred.

  • Applicable military experience or other related operations experience will be considered including power plants, multi-family, hotels, hospitals, facilities, etc.

  • Experience with painting, carpentry and cleaning is required.

  • Manage own time on a daily basis with little supervision as well as the ability to work collaboratively as part of a team.

  • May be required to work extended periods of time without relief, when responding to priority/emergency situations (including overtime-type assignments).

  • Stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. of equipment (pump, tools, ladders) and ability to safely install rigging/lifting device.

  • Lift and carry objects of up to 50 lbs. for distances of up to 30 feet.

  • Climb ladders and stairs. Must be available to work flexible schedule including some weekends, evenings, and some holidays. Expected to share on-call responsibilities.

  • Must be available to work overtime hours, as needed. Excellent client service skills.

  • Ability to work in a fast-paced environment, with the ability to multi-task and meet deadlines. Must be team oriented and a problem solver.

  • Strong verbal and written communication skills.

  • Maintains professional appearance and manner at all times.

  • Will be required to perform off site duties through the use of a personal vehicle. Must have a valid driver’s license.

  • If, at any time, security clearance is required for your job (e.g. you are assigned to work at a property leased by the Federal government), being awarded such clearance will be a condition of your employment.


 


Job Title: Clinical Specialist
Location
: Lagos
Essential Duties and Responsibilities



  • Plan, coordinate, and implement clinical evaluations to ensure clinical acceptance of our products and technology.

  • Develops and disseminates information to Managers and others regarding issues related to customer acceptance of our technology and products during the pre-sale and evaluation process.

  • Works with customers to introduce, promote, and increase the usage of our products throughout a customer facility.

  • Provide installation, related in-service education, and integration to new clients to ensure customer satisfaction.

  • Provide information through formal presentations to Physicians, Allied Health, and Administration customers that detail the clinical and/or financial benefits of our technology as related to the group.

  • Train employees as well as other internal customers on the operation, features, and benefits of our Products and technology.

  • Assist with the collection and dissemination of information or feedback provided by customers.

  • Evaluate new products or enhancements to our technology to provide information and feedback to the Product Development and Marketing departments.

  • Provide product support to users either in person, or by written or verbal means.

  • Represent us at various trade shows or educational meetings and complete all necessary reports.

  • Prepares reports and analysis of activities to the Director of West Africa Business and/or other executives.

  • Continuously increases knowledge of new developments within the assigned market as well as our products to perform as a subject matter expert.

  • Work with Regional Marketing team and complete one joint case study a year.

  • Other duties as assigned by West Africa Sales Director to support team.


Qualifications
Minimum Education & Experience:



  • Bachelor’s Degree in a Clinical/Science concentration or Business, Marketing, Education, or Communications or related field; or equivalent combination of education and experience.

  • Five years experience in a clinical discipline, preferably in a discipline that requires exposure and understanding within multiple clinical areas such as OR, ICU, Therapies, and medical/surgical patient areas for adult, pediatric and neonatal patient populations.

  • Demonstrate effective educational and presentation skills in diverse settings from one-on-one to formal large group situations. Ability to work independently with little or no direct supervision.Able to travel overnight to client facilities by auto or aircraft 70-80% of the time.Advanced MS Office skills to develop effective reports, spreadsheets, and presentations.


Preferred:



  • Prior Clinical Specialist experience for a medical device manufacturer in the critical care environment.

  • Clinical experience in adult and pediatric OR, PACU, and ICU environments.Prior experience with Capnography and Regional Oximetry.

  • Experience in education within the clinical environment Knowledge of patient monitoring and Electronic Medical Records.


Physical Requirements:



  • Ability to sit, stand, and/or walk for 8 hours/day.Ability to travel by car and/or aircraft extensively.


 


Job Title: Cleaner
Location
: Lagos
Details



  • Perform heavy cleaning duties, such as cleaning floors, washing walls and glass, and removing rubbish.


Responsibilities



  • Clean building floors by sweeping, mopping, scrubbing, or vacuuming them.

  • Gather and empty trash.

  • Clean and polish furniture and fixtures.

  • Clean windows, glass partitions, and mirrors, using soapy water or other cleaners, sponges, and squeegees.

  • Dust furniture, walls, machines, and equipment.

  • Mix water and detergents or acids in containers to prepare cleaning solutions, according to specifications.

  • Steam-clean or shampoo carpets.

  • Strip, seal, finish, and polish floors.

  • Follow procedures for the use of chemical cleaners and power equipment, in order to prevent damage to floors and fixtures.

  • Notify managers concerning the need for major repairs or additions to building operating systems.


Qualifications



  • Should be able to perform in a manner displaying excellent attitude, enthusiasm and guest service

  • Ability to lift items that weigh 25 – 35 lbs.

  • Must be detail-oriented and have ability to multi-task

  • Must have ability to prioritize and organize work

  • Ability to work well with others

  • Capable of lifting, bending, stooping, pushing & pulling heavy loads

  • Flexible schedule required, including a willingness to work AM/PM shifts, weekends and holidays


 


Job Title: Janitor
Location
: Lagos
Job Description



  • Performs general labor work in cleaning tramway properties, facilities, and grounds.


Job Duties



  • On a daily or shift basis, cleans and keeps, in an orderly condition at all times, the tramway properties, facilities, and grounds.

  • Collects and disposes of trash from all areas of the tramway, terminals and grounds.

  • Cleans windows in the lower and upper terminal areas, including tramway offices, cabins, viewing areas, restaurant and lobby space.

  • Dusts, wipes down, and sanitizes working and customer space, counters, equipment, fixtures, etc. of restrooms, kitchen and restaurant areas, elevators, lobby space and the like.

  • Replenishes supplies as necessary.

  • Sweeps, vacuums, mops and waxes all floor space.

  • Provides assistance to other staff and departments, when requested or necessary.

  • Performs other incidental and related duties as required and assigned.


Necessary Skills and Knowledge



  • Ability to meet time and attendance requirements.

  • Ability to work all different shifts including days, evenings, holidays and weekends.

  • Ability to handle stress under pressure.

  • Ability to provide quality customer service.

  • Able to communicate verbally, and understand and follow written and verbal instruction.

  • Skill in establishing and maintaining cooperative working relationships with other employees.

  • Ability to work directly with the public, providing information and assistance on a daily basis.

  • Ability/willingness to learn and pass on to guests those areas of interest to visitors, such as local history, people, culture, geography, etc.

  • Some knowledge of basic cleaning principles, equipment and products.

  • Detail oriented.


How to Apply
Interested and qualified candidates should send their CV’s to: [email protected]






Jobs in Nigeria






Imisi Partners New Ongoing Recruitment [4 Positions]

Nestle Nigeria Plc New Recruitment


Nestle Nigeria Plc with a presence in more than 130 countries and factories in more than 80 research centres
brings many global benefits. We believe in long term career development and appreciate how challenges and motivation will help you reach your potential. Nestle Nigeria Plc upholds the principle of Non- Discrimination and Equal Employment Opportunities in its recruitment processes.


Application are hereby required from suitably qualified candidates to fill the vacant position below at our Factory in Agbara:


Job Title: Production Technician
Location:
 Agbara, Ogun
Responsibilities



  • Carrying out all line operation, troubleshooting and repairs

  • Adhering to and following defined operational standards

  • Ensuring safety of self, product, workplace and colleagues while also ensuring control of the impact of this activities on the environment

  • Maintaining food safety awareness and its relevance, in order to ensure strict compliance in the workplace.

  • Carrying out quality checks (PRPs and OPRPs) as stipulated in the Quality Management System before, during and after operations

  • Participating in planning and execution of preventive and corrective maintenance activities


Requirements



  • Ordinary National Diploma in Electrical / Mechanical Engineering with a minimum of lower credit

  • Computer literacy (MS office applications)

  • Good communication skills (oral and written)

  • Good organizational and interpersonal skills.

  • At least, 2 years relevant work experience

  • Minimum of five (5) credits including English language and Mathematics in SSCE/NECO or its equivalent (Not more than 2 sittings)


How to Apply
Interested and qualified candidates should send their CV’s and completed “MS Excel format” below to: [email protected]


Excel Format
Title | Surname | Other Names | Age (as at 1st Jan. 2018 | Basic Qualification (e.g SSCE/NECO) | Other Qualification(s) e.g OND l Phone No l Years of experience l Place of previous employment | Email address |


Note



  • Only short-listed candidates will be contacted.

  • Candidates who have applied to this position within the last 60 days need not apply


Application Deadline: 12th February, 2018.






Jobs in Nigeria






Nestle Nigeria Plc New Recruitment

Dragnet Solutions Limited Graduate Internship Recruitment


Dragnet Solutions Limited – Our client, an independent exploration and production company located in Lagos with oil and gas Assets located in the shallow offshore.


We seek qualified candidates to fill the position below:


Job Title: Graduate Internship Program
Location:
 Lagos
Job Description



  • Our Graduate internship program offers an opportunity for self-motivated and innovative individuals who will work in a highly technical and commercial organisation while gaining valuable operational and leadership experience.


Eligibility Criteria
Prospective candidates must meet the following requirements:



  • A minimum of 2nd Class (Upper Division) degree obtained in any of the following disciplines:

    • Chemical Engineering

    • Electrical/ Electronics Engineering

    • Process Engineering

    • Industrial Engineering

    • Mechanical Engineering

    • Civil Engineering

    • Petroleum Engineering



  • Not more than 26 years old

  • Must have completed the mandatory National Youth Service Corps (NYSC) with a valid certificate.


Key competencies required:



  • Must be fluent in English – written and spoken

  • Self-driven and result-oriented

  • Problem-solving skills

  • Analytical skills

  • Good team player

  • Excellent verbal and written communication

  • Strong interpersonal skills

  • Entrepreneurial mindset


How to Apply
Interested and qualified candidate should:
Click here to apply


Note



  • Only short-listed candidates will be contacted and invited for an Aptitude Test.

  • All multiple applicants will be disqualified.

  • Aptitude test notifications will be sent via email and SMS.

  • All educational qualifications and certificates presented by applicants will be verified


Application Deadline  14th February, 2018.






Jobs in Nigeria






Dragnet Solutions Limited Graduate Internship Recruitment

Tuesday, January 23, 2018

Latest Job Recruitment at Guinness Nigeria Plc, Tuesday 23, January 2018

Guinness Nigeria Plc is a major market for Diageo: Guinness Nigeria operates in the unique and fast growing alcohol industry of over 15mhl beer potential. It is the only company that does Total Beverage Alcohol (TBA) in Nigeria. It’s an on trade dominated market but with a fast growing off trade channel.


TECHNICAL OPERATOR, FILLER


AutoReqId: 60249BR

Location: Benin, Edo

Function: Sales

Type of Job: Employee

Level: 7A

Reports To: Spirits Operations Manager


CONTEXT OF THE ROLE

The Spirits Operations Technician-labeller will be responsible for operating, cleaning and maintaining their plant and equipment in a safety conscious manner to meet the increasing volume and quality demands in a reliable and cost efficient manner.

They are also responsible for participating in all improvement initiatives and PIP’s in their department and for their own training and development. They will report to the Spirits Operations Manager.


PURPOSE OF THE ROLE

To produce spirits at customer service levels, quality conformance at the right budget.

To apply technical, process, continuous improvement and individual/team development skills to optimize overall brewery improvement and plant performance.

To adopt a safe and professional approach to all aspects of the role as an individual/team player.

Market Complexity:


The Nigerian Spirits market is very complex with many competitors and a strong quality, cost and delivery focus

The need to constantly reduce production cost, while maintaining high quality and delivery in a highly unionised working environment.


TOP ACCOUNTABILITIES

Carries out the filler operation of the spirits packaging process through stipulated processes and procedures.

Adhere to GNPLC policy and procedures for Safety, Health and Environment and hygiene to ensure a safe and efficient operating environment. Utilise and apply safe systems of working and pro-actively seek opportunities to improve work environment.

Ensures both liquid, bottle and crown wastes are within AOP.

Deliver best possible plant operation by maximising plant availability and efficiency of operation through execution of Planned Preventative Maintenance schedules.

Optimise finished product quality, through continuous observation and attention to detail, delivering RFT against the Global Finished Product Specification on quality and control parameters. Respond to non-conformances in a timely manner to keep process on track. Apply, record & share learning’s or RCPS Root Cause Problem Solving to prevent re-occurrence.

Demonstrate flexibility in terms of availability, attitude and work practices and assist colleagues in breakdown maintenance and solving problems on their equipment.

With support from Spirits Operations Manager, achieve production plans and key performance targets, and deliver agreed Customer Service levels.


QUALIFICATIONS AND EXPERIENCE REQUIRED

OND/ Trade test (City and Guild) or any nationally recognized equivalent in any of Mechanical/ Electrical/ Instrumentation field and ideally have an appropriate qualification in Packaging, Engineering or Utilities in addition.

Minimum of 2 to 3 years’ experience/competence in Operations, Maintenance, Process Control and Performance Measurement in a brewery, drinks or food manufacturing environment.

Demonstrate detailed understanding of Permit to Work system and GNPLC SHE policies, statutory requirements and responsibilities.

Demonstrate understanding of teamwork principles, continuous improvement, preventative maintenance and problem solving.

Respond to change in a positive and flexible manner and sustain a positive outlook across a range of situations/challenges.

High level of energy and commitment to team based achievement and high interpersonal effectiveness to develop & sustain robust relationships.


TECHNICAL OPERATOR, FILLER


AutoReqId: 60250BR

Location: Ogba, Lagos

Function: Sales

Type of Job: Employee

Level: 7A

Reports To: Spirits Operations Manager


CONTEXT OF THE ROLE

The Spirits Operations Technician-labeller will be responsible for operating, cleaning and maintaining their plant and equipment in a safety conscious manner to meet the increasing volume and quality demands in a reliable and cost efficient manner.

They are also responsible for participating in all improvement initiatives and PIP’s in their department and for their own training and development. They will report to the Spirits Operations Manager.


PURPOSE OF THE ROLE

To produce spirits at customer service levels, quality conformance at the right budget.

To apply technical, process, continuous improvement and individual/team development skills to optimize overall brewery improvement and plant performance.

To adopt a safe and professional approach to all aspects of the role as an individual/team player.


Market Complexity:

The Nigerian Spirits market is very complex with many competitors and a strong quality, cost and delivery focus

The need to constantly reduce production cost, while maintaining high quality and delivery in a highly unionised working environment.


TOP ACCOUNTABILITIES

Carries out the filler operation of the spirits packaging process through stipulated processes and procedures.

Adhere to GNPLC policy and procedures for Safety, Health and Environment and hygiene to ensure a safe and efficient operating environment. Utilise and apply safe systems of working and pro-actively seek opportunities to improve work environment.

Ensures both liquid, bottle and crown wastes are within AOP.

Deliver best possible plant operation by maximising plant availability and efficiency of operation through execution of Planned Preventative Maintenance schedules.

Optimise finished product quality, through continuous observation and attention to detail, delivering RFT against the Global Finished Product Specification on quality and control parameters. Respond to non-conformances in a timely manner to keep process on track. Apply, record & share learning’s or RCPS Root Cause Problem Solving to prevent re-occurrence.

Demonstrate flexibility in terms of availability, attitude and work practices and assist colleagues in breakdown maintenance and solving problems on their equipment.

With support from Spirits Operations Manager, achieve production plans and key performance targets, and deliver agreed Customer Service levels.


QUALIFICATIONS AND EXPERIENCE REQUIRED

OND/ Trade test (City and Guild) or any nationally recognized equivalent in any of Mechanical/ Electrical/ Instrumentation field and ideally have an appropriate qualification in Packaging, Engineering or Utilities in addition.

Minimum of 2 to 3 years’ experience/competence in Operations, Maintenance, Process Control and Performance Measurement in a brewery, drinks or food manufacturing environment.

Demonstrate detailed understanding of Permit to Work system and GNPLC SHE policies, statutory requirements and responsibilities.

Demonstrate understanding of teamwork principles, continuous improvement, preventative maintenance and problem solving.

Respond to change in a positive and flexible manner and sustain a positive outlook across a range of situations/challenges.

High level of energy and commitment to team based achievement and high interpersonal effectiveness to develop & sustain robust relationships.


TEAM LEADER, PACKAGING


AutoReqId: 60251BR

Location: Ogba, Lagos

Function: Sales

Type of Job: Employee

Level: L6

Reports To: Shift Manager


CONTEXT OF THE ROLE

The Packaging Department is responsible for the packaging of all brewing products into returnable and non-returnable containers, ready for distribution.

The Packaging Team Leader is responsible for his Line during shift production hours, with full responsibility for his team and the dept. assets. The incumbent oversees all packaging activities through his team, and reports to the Packaging Shift Manager. The incumbent is responsible for meeting shift production volumes on his/her line at the right quality, while achieving targets in a cost efficient manner.

They are also responsible for the shift delivery of all productivity initiatives and the entrenchment of EISC practices in a safe and healthy working environment.


PURPOSE OF THE ROLE

Overall responsibility for the delivery of Line output during shift run, targets and goals by managing, leading and supporting shift team to produce in a safe manner to desired customer service, quality and yield levels in the most cost effective and efficient manner.

To identify and drive improvement, ensuring delivery of dept. goals.

To manage resource allocation, develop team members and optimise individual potential to contribute to overall site performance.


Market Complexity:

The Nigerian beer market is very complex with many competitors and a strong quality, cost and delivery focus.

Need to constantly reduce production cost, while maintaining high quality and delivery in a highly unionised working environment.


TOP ACCOUNTABILITIES

Supervise, prioritise and coordinate all activities of shift team workers on Line, including operational, personnel, and administrative tasks to ensure that all products required are produced to target volumes and specifications with best possible efficiencies and optimum KPI’s.

Control cost of packaging by minimising process waste, maximising efficiencies and taking appropriate actions to reduce downtime and improve quality.

Develop & deliver improved performance against targets through effective problem solving, decision-making and communication between shift teams, and aligned planned activity with EISC Team, Engineering, Brewing, customer services and Brewery Logistics.

Lead implementation of the company’s health, safety, quality, environment and hygiene standards for the protection of company products, personnel and assets in the packaging environment.

Manage team’s individual training & development within clear improvement plans, using the BCM and CAP framework and Perfect Plant methodology to drive performance and efficiencies towards world class standards.


QUALIFICATIONS AND EXPERIENCE REQUIRED

Science or Engineering Degree or equivalent

Should hold an IBD/NSE qualification and knowledge of packaging and WCM techniques.

4 years’ experience in food or drink packaging environment with a track record of delivering sustainable improvements in packaging efficiency and quality, particularly through effective people management and development.

Competency in packaging management and prioritization of resources to meet key targets, while setting high standards & stretching goals for self & others to exceed internal & external customer needs

Knowledge of Guinness policies is an added advantage.

Structured problem evaluation & solving skills and ready to make decisions, take the initiative and originate action.

High level of energy and commitment to team based achievement and high interpersonal effectiveness to develop & sustain robust relationships.


SACHET MACHINE OPERATOR


AutoReqId: 60248BR

Location: Benin, Edo

Function: Sales

Type of Job: Employee

Level: 7A

Reports To: Spirits Operations Manager


CONTEXT OF THE ROLE

The Spirits Sachet Machine Operator will be responsible for operating, cleaning and maintaining their plant and equipment in a safety conscious manner to meet the increasing volume and quality demands in a reliable and cost efficient manner.

They are also responsible for participating in all improvement initiatives and PIP’s in their department and for their own training and development. They will report to the Spirits Operations Manager.


PURPOSE OF THE ROLE

To produce spirits at customer service levels, quality conformance at the right budget.

To apply technical, process, continuous improvement and individual/team development skills to optimize overall brewery improvement and plant performance.

To adopt a safe and professional approach to all aspects of the role as an individual/team player.


Market Complexity:

The Nigerian Spirits market is very complex with many competitors and a strong quality, cost and delivery focus

The need to constantly reduce production cost, while maintaining high quality and delivery in a highly unionised working environment.


TOP ACCOUNTABILITIES

Carries out the packaging of spirits in sachet and also oversees the coding of the sachets.

Adhere to GNPLC policy and procedures for Safety, Health and Environment and hygiene to ensure a safe and efficient operating environment. Utilise and apply safe systems of working and pro-actively seek opportunities to improve work environment.

Ensures both bottle and label wastes are within AOP.

Deliver best possible plant operation by maximising plant availability and efficiency of operation through execution of Planned Preventative Maintenance schedules.

Optimise finished product quality, through continuous observation and attention to detail, delivering RFT against the Global Finished Product Specification on quality and control parameters. Respond to non-conformances in a timely manner to keep process on track. Apply, record & share learning’s or RCPS Root Cause Problem Solving to prevent re-occurrence.

Demonstrate flexibility in terms of availability, attitude and work practices and assist colleagues in breakdown maintenance and solving problems on their equipment.

With support from Spirits Operations Manager, achieve production plans and key performance targets, and deliver agreed Customer Service levels.


QUALIFICATIONS AND EXPERIENCE REQUIRED

OND/ Trade test (City and Guild) or any nationally recognized equivalent in any of Mechanical/ Electrical/ Instrumentation field and ideally have an appropriate qualification in Packaging, Engineering or Utilities in addition.

Minimum of 2 to 3 years’ experience/competence in Operations, Maintenance, Process Control and Performance Measurement in a brewery, drinks or food manufacturing environment.

Demonstrate detailed understanding of Permit to Work system and GNPLC SHE policies, statutory requirements and responsibilities.

Demonstrate understanding of teamwork principles, continuous improvement, preventative maintenance and problem solving.

Respond to change in a positive and flexible manner and sustain a positive outlook across a range of situations/challenges.

High level of energy and commitment to team based achievement and high interpersonal effectiveness to develop & sustain robust relationships.


Policies highly relevant to the Supply Function:

Environment Policy, Quality Policy, Anti-Corruption Policy, Occupational Health and Safety Policy,


TO APPLY

Click on Job Title below:


TECHNICAL OPERATOR, FILLER

TECHNICAL OPERATOR, FILLER

TEAM LEADER, PACKAGING

SACHET MACHINE OPERATOR 




Jobs in Nigeria






Latest Job Recruitment at Guinness Nigeria Plc, Tuesday 23, January 2018

Friday, January 19, 2018

Chrisland University Current Recruitment [7 Positions]


Chrisland University is a vision-driven private university approved by the Federal Government of Nigeria, with its take off site in Abeokuta, Ogun State. The aim of the University is to become a world class institution renown for intellectual freedom, ethical standards, research, community service & outstanding training of a new generation of leaders.


The University therefore invites applications from suitably qualified candidates for the under-listed positions:


Job Title: Account Officer
Location: 
Owode, Ogun
Requirements



  • Candidates most possess a good honours degree in Accounting, Economics or Banking and Finance plus a minimum of 3 years post-NYSC relevant work experience.


 


Job Title: Marketing Officer
Location: 
Owode, Ogun
Requirements



  • Candidates must possess a good honours degree in Marketing, Business Administration, Economics or Mass Communication plus a minimum of 3 years post-NYSC relevant work experience.

  • Must be computer literate and possess good communication skills.


 


Job Title: Personal Assistant to the Chancellor
Location: 
Owode, Ogun
Requirements



  • Candidates must possess a good honours degree in the Arts or Social Sciences with a minimum of 3 years cognate work experience.

  • Must be computer literate and possess good communication skills.


 


Job Title: Chief Security Officer
Location: 
Owode, Ogun
Requirements



  • Candidates must possess a minimum of a Bachelor’s Degree or equivalent with certification in Management/Safety and Security operations and considerable post qualification experience of not less than 12 years in Security Services in a reputable Corporate Organization, 3 of which must be at management level.

  • Candidates without a degree but with considerable experience and proven track record as officers in the Nigerian Armed Forces or the Nigeria Police are also eligible to apply.


 


Job Title: Director of Work and Services
Location: 
Owode, Ogun
Requirements



  • Candidates must possess a good honours degree in Civil, Mechanical or Electrical Engineering, be registered with COREN and possess a minimum of 15 years cognate post-qualification experience in a corporate organization, 3 of which must be at top management level.


 


Job Title: Deputy Registrar
Location: 
Owode, Ogun
Requirements



  • Candidates must possess a good honours degree in the Arts or Social Sciences.

  • Possession of a Master’s Degree in relevant disciplines and membership of a registered professional body will be an advantage.

  • Candidates must possess a minimum of 14 years relevant post- qualification work experience in institutional administration in a tertiary institution.

  • Must be computer literate.


 


Job Title: Principal Librarian
Location: 
Owode, Ogun
Requirements



  • Candidate must possess a good honours degree plus a minimum of a Master’s degree in Library and Information Science from a recognized University with a minimum of 9 years post qualification work experience and at least 8 publications.


Remuneration
Chrisland University operates a Salary Structure and Condition of Service comparable to what obtains in the Nigerian University system.


How to Apply
Interested and qualified candidates should submit Ten (10) copies of applications, Curriculum Vitae, photocopies of credentials and other valid documents. The Curriculum Vitae must be in the following format:



  • Full Name (Surname First in Capital Letters)

  • Post Applied for

  • Gender

  • Place and Date of Birth

  • Nationality/State of Origin/Local Government

  • Marital Status

  • Number, Names and Ages of Children

  • Name, Address and Phone number of Next of Kin

  • Current Postal Address

  • G.S.M. Phone Number & Email address

  • Permanent Home Address

  • Institutions Attended with dates

  • Academic and Professional Qualifications (with dates)

  • List of Publications with dates (If any)

  • Working Experience (with dates)

  • Present Employer: current status, Salary Scale/Step

  • Membership of Professional Bodies

  • Extra-Curricular Activities

  • Names and Addresses of three (3) Relevant Referees


All Applications and Referees’ reports should be forwarded not later than the closing date above and addressed to:


The Registrar,
Chrisland University,
Owode, Abeokuta Campus,
P.M.B. 2131,
Ajebo Road,
Abeokuta,
Ogun State.

Note: Only Shortlisted candidates will be contacted.


Application Deadline  2nd February, 2018.






Jobs in Nigeria






Chrisland University Current Recruitment [7 Positions]

Wednesday, January 17, 2018

Career Opportunities at TVC Communications, Wednesday 17, January 2018

TVC Communications is one of Nigeria’s leading broadcast companies operating market leading channels including TVC, TVC News Channel, Max 102.3 Lagos, Adaba FM Ondo and TVC Digital.


We are now expanding our business through an aggressive programme of investment to help build audience share and drive cross-platform advertising revenue.


BROADCAST/IT TECHNICIAN (FOR RADIO AND TV)


JOB PURPOSE

We seek an experienced Broadcast/IT Technician (for Radio and TV) to Set up, operate, control and maintain the electronic/audio equipment used to transmit radio and television programs.


RESPONSIBILITIES / KEY PERFORMANCE INDICATORS


Assist with the installation, maintenance, repair of digital broadcasting equipment including cameras, switchers, audio devices, server-based newsroom and production control systems.

Be solely responsible for assisting with desktop support, networking and maintenance of user workstations and networked devices with essential software and routine updates for TV as well as Radio Studios.

Provide technical support to live newscasts, studio and remote productions as and when necessary.


CRITICAL QUALIFICATION/REQUIREMENTS/ SKILLS/EXPERIENCE

Must possess a Degree/ National Diploma in Information Technology or in Electrical/Communication Engineering

Candidate must have at least two years of experience working with information technology and television broadcast equipment.

Must be dependable, a self-starter and be able to perform quickly and efficiently under pressure of deadlines.

Ability to learn and adapt to new and developing technologies.

Operational knowledge of the equipment will be an added advantage.

Must be flexible to accommodate shift changes which could include early mornings, evenings and weekends.


PCR OPERATOR (TV)


JOB PURPOSE

We seek an experienced PCR Operator (for TV) to assist in leading the daily operations of the production control room and supporting the production gallery to ensure that content is delivered to the highest standards.


RESPONSIBILITIES / KEY PERFORMANCE INDICATORS


Ability to assist in all aspects of television production including studio preparation, operation on the sound mixing console and vision mixing console.

Should be able to assist in satellite news gathering operations when necessary.


CRITICAL QUALIFICATION/REQUIREMENTS/SKILLS/EXPERIENCE

National Diploma in Film and TV Production or in Electrical/Communication Engineering

The position requires working early morning shifts, evening shifts and weekends.

Must possess an outstanding multi-tasking skill.

Knowledge of Windows PCs is very necessary.

Preference will be given to candidates with Camera and video production experience

Must be dependable

Must be a good team player

Must work well under pressure


TO APPLY

Click on Job Title below:


BROADCAST/IT TECHNICIAN (FOR RADIO AND TV)
PCR OPERATOR (TV)


DUE DATE: 23 January, 2018




Jobs in Nigeria



Career Opportunities at TVC Communications, Wednesday 17, January 2018

Tuesday, January 16, 2018

Ocean Deep Drilling ESV Nigeria Limited (ODENL) Ongoing Massive Recruitment [25 Positions]


Ocean Deep Drilling ESV Nigeria Limited (ODENL) – A joint venture partnership company which was formed by an indigenous provider of drilling rig services and a leading international drilling company that has created a world class drilling company and is poised to deliver exceptional value to the exploration and production companies operating in Nigeria, is looking to recruit competent indigenous persons to fill the positions below:


Job Title: Store Keeper
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical / bachelor’s Degree.
    7 years minimum experience utilizing PeopleSoft Warehouse Management Module or other Computerized Warehouse Maintenance Management System (CMMS) software.
    5 years rig-based experience in similar position with exposure to warehouse maintenance application

 


Job Title: 3rd Engineer
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Marine Engineering Degree

  • 5 years off shore experience on Dynamic Positioning vessel Valid Certificate of Competency with the qualification of 3rd Engineer unlimited.

 


Job Title: 2nd Engineer
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Marine Engineering

  • 7 years off shore experience on Dynamic Positioning vessel with 4 years minimum experience as 2nd Engineer.

  • Valid Certificate of Competency with the qualification of First Engineer-all ships.

  • Valid STCW 95 Ill/I Certificate and 3rd Class Motor.

 


Job Title: Chief Engineer
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Marine Engineering Degree

  • 12 years off shore experience on a Dynamic Positioning vessel with 5 years minimum as First Engineer.

  • Valid Certificate of Competency with the qualification of First Engineer-all ships without limitations.

  • Valid STCW 95 III/2 Certificates.

 


Job Title: Rig Maintenance Supervisor
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • Chief Engineer License without limitation of horsepower or geographical area preferred.

  • 15 years off shore experience in Mechanical Department (topside or engine room) with minimum of 7 years working on a Drilling vessel in a Maintenance Discipline and Minimum of 5 years as Department head in one of the following disciplines -Engineering; Electrical/Electronic; Mechanical or Subsea.

  • Extensive Mechanical /Hydraulic experience on 5th or 6th generation rigs.

  • Minimum of 5 years working on a Drilling vessel in a Maintenance Discipline

 


Job Title: Electronic Technician
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 7 years off shore experience in Electrical/Electronic Department

  • Certificates and working knowledge of SCR Drives, Generator Controls, and Programmable Logic Controllers (PLCs), CompEx, etc

 


Job Title: Chief Electronic Technician
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 12 years offshore experience in Electrical/Electronic Department with supervisory responsibility.

  • Certificates and advance working knowledge of SCR Drives, Generator Controls, and Programmable Logic Controllers (PLCs), CompEx, etc are required.

  • Experience with both Low- and High Voltage Systems is required.

 


Job Title: Electrician
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /En9ineenng Degree

  • 7 years offshore experience in electrical department.

  • Certificates and advance working knowledge of repair and rebuilding electrical components and wiring of electrical motors which include: Generators and Generator control systems, Transforming systems, Drilling system, Electrical motors, Jacking systems, Pumps, Air conditioning and refrigeration systems, Crane electrical systems, Inter communication equipment, Power generators, Lighting fixtures,Alarms, Fuses and Switches

 


Job Title: Mechanic
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 7 years off shore experience in position as Mechanic experienced and trained on Hydraulic Systems troubleshooting and maintenance.

 


Job Title: Chief Electrician
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 12 years off shore experience in electrical department with supervisory responsibility.

  • Certificates and working knowledge of SCR Drives, Generator Controls, and Programmable Logic Controllers (PLC5) are required.

  • Experience with both Low- and High-Voltage Systems is required.

 


Job Title: Hydraulic Technician
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 7 years Mechanic /Hydraulic experience or equivalent on 5th or 6th generation Rigs.

  • Certificates in MODU Hydraulic Equipment

 


Job Title: Chief Mechanic
Location: 
Offshore, Nigeria
Requirements


  • Associate’s degree in Technical /Engineering Degree

  • 12 years off shore experience, with minimum of 5 years as Chief Rig Mechanic with supervisory responsibility.

  • Extensive Mechanic /Hydraulic experience or equivalent on 5th or 6th generation Rigs.

  • Certificates and working experience with NOV Drilling Package

  • Strong experience with power and hydraulic systems.

  • High Level knowledge of machine shop and welding activities.

 


Job Title: Subsea Engineer
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 5 years’ experience in subsea engineering.

  • Technical (Mechanic/Hydraulic)Certification or equivalent subsea related program,

  • Fundamental Well Control Certificate – Subsea and Surface combined

 


Job Title: Senior Subsea Engineer
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 10 years offshore experience in subsea engineering.

  • Technical (Mechanic/Hydraulic) certification.

  • Supervisor Well Control Certificate – Subsea and Surface combined;

  • Technical certification-BOP preferably.

 


Job Title: Driller
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 5 years minimum deep water off shore drilling experience.

  • Technical knowledge of calculations for safe operations of drilling unit and control of the well.

  • Supervisory Well Control Certificate is a must.

  • NOV 6th generation on Cyberchair experience.

 


Job Title: Toolpusher
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 7 years deep water offshore drilling experience including 4 years proven experience as Driller.

  • Supervisory Well Control certificate.

  • NOV 6th generation cyberchair experience

 


Job Title: Performance Toolpusher
Location: 
Offshore, Nigeria
Requirements


  • Associate’s degree in Technical /Engineering Degree

  • 7 years deep water off shore drilling experience including 4 years proven experience as a Toolpusher/Driller.

  • Supervisory Well Control certificate.

  • NOV 6th generation cyberchair experience

  • Ability to analyze and interpret data

 


Job Title: Senior Toolpusher
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 10 years deep water off shore drilling experience including 7 years proven experience as Toolpusher or Performance Toolpusher.

  • Supervisory Well Control Certificate.

  • NOV 6th generation cyberchair experience

  • Must be Computer Literate.

 


Job Title: 3rd Mate/DPO
Location: 
Offshore, Nigeria
Requirements


  • Nautical College- Maritime Engineering Degree

  • Valid Nautical Dynamic Positioning Operators Certificate.

  • 3rd Mate unlimited DPO Certificate.

  • 3-5 years minimum off-shore experience in Marine department;

  • Prior drillship experience is preferred.

 


Job Title: 2nd Mate/DPO
Location: 
Offshore, Nigeria
Requirements


  • Nautical College- Maritime Engineering Degree

  • 5 years minimum off-shore experience in Marine department or 7 years minimum of related Dynamic Positioning experience in related marine environment.

  • 2nd Mate unlimited Dynamic Positioning Unlimited license preferably.

 


Job Title: Chief Mate
Location: 
Offshore, Nigeria
Requirements


  • Nautical College- Maritime Engineering Degree

  • Valid unlimited Chief Mates license

  • GMDSS General Operators certificate

  • Nautical Institute Dynamic Positioning training courses;

  • Nautical Institute Dynamic Positioning Unlimited certificate.

  • Knowledge of all technical calculations required for safe operation on of marine aspect of the vessel;

  • 8 years deep water off shore drilling experience including 5 years proven experience as Chief Mate;

  • All STCW 95 required training for Chief Mate vessel class and flag requirements, endorsement issued by flag authority for recognition of foreign COC without restrictions.

  • Valid Ship Security Officer’s certificate is a must.

  • Prior drillship experience is preferred.

 


Job Title: Master
Location: 
Offshore, Nigeria
Requirements


  • Nautical College- Maritime Engineering Degree

  • Valid Nautical Unlimited Master and Chief Officer Certificates.

  • All STCW 95 required training for Master on class of vessel and flag requirements, endorsement issued by the Flag Authority for recognition of Foreign Chief Officer Certificate without restrictions for class of vessel and equivalent to the national license.

  • 10 years deep water offshore drilling experience including 7 years proven experience as Master

  • Valid ship Security Officer certificate.

  • Deepwater drilling rig experience on drilling rig, drillship or semi; and

  • Minimum of 18 months operational mode as Chief Mate on a deep water drilling rig;

  • Valid Supervisor Well Control certification.

 


Job Title: Offshore Installation Manager
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 15 years rig experience including 10 years proven experience as Snr. Toolpusher on a deep-water drilling vessel.

  • Supervisory Well Control, OIM license, NOV 6th generation on cyberchair.

 


Job Title: Rig Asset Manager
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 12 years Asset /PMS Management Experience in deep water drilling operations

  • Strong leadership and customer relationship skills.

  • Supervisory Well Control and OIM license

 


Job Title: Rig Manager
Location: 
Offshore, Nigeria
Requirements


  • Associates degree in Technical /Engineering Degree

  • 12 years Management Experience in deep water drilling operations.

  • Strong leadership and customer relationship skills.

  • Supervisory Well Control and OIM license

How to Apply
Interested and qualified candidates should send their CV’s (only) to: [email protected]


Application Deadline  30th January, 2018.





Jobs in Nigeria



Ocean Deep Drilling ESV Nigeria Limited (ODENL) Ongoing Massive Recruitment [25 Positions]

Facebook AI Research Residency Program 2018


The Facebook AI Research (FAIR) Residency Program is a one-year research training program with Facebook’s AI Research group, designed to give you hands-on experience of machine learning research. The program will pair you with a senior researcher or engineer in FAIR, who will act as your mentor. Together, you will pick a research problem of mutual interest and then devise new deep learning techniques to solve it. We also encourage collaborations beyond the assigned mentor. The research will be communicated to the academic community by submitting papers to top academic venues (NIPS, ICML, ICLR, CVPR, ICCV, ACL, EMNLP etc.), as well as open-source code releases. Visit the FAIR research page for examples of research performed in FAIR .


The AI research residency experience is designed to prepare you for graduate programs in machine learning, or to kickstart a research career in the field. This is a full-time program that cannot be undertaken in conjunction with university study or a full-time job.


We encourage applications from people who have a strong technical background and are passionate about AI research. Prior experience in machine learning is certainly a strength but we seek people from a diverse range of backgrounds, including areas ostensibly unrelated to machine learning such as (but not limited to) math, physics, finance, economics, linguistics, computational social science, and bioinformatics.


Accepted research residents will be based in Facebook Menlo Park and New York locations. If a candidate requires a visa to work in the US, we will explore what options are available once they are accepted onto the program.


Resident Responsibilities


  • Learn how to perform research in deep learning and AI.

  • Understand prior work and existing literature.

  • Work with research mentor(s) to identify problem(s) of interest and develop novel AI techniques.

  • Translate ideas into practical code (in frameworks such as PyTorch, Caffe 2).

  • Write up research results in the form of an academic paper and submit to a top conference in the relevant area.

Eligibility Requirements


  • Bachelors degree in a STEM field such as Mathematics, Statistics, Physics, Electrical Engineering, Computer Science, or equivalent practical experience.

  • Completed coursework in: Linear Algebra, Probability, Calculus, or equivalent.

  • Coding experience in a general-purpose programming language, such as Python or C/C++.

  • Familiarity with a deep learning platform such as PyTorch, Caffe, Theano, or TensorFlow.

  • Ability to communicate complex research in a clear, precise, and actionable manner.

Preferred Qualifications


  • Research experience in machine learning or AI (as established for instance via publications and/or code releases).

  • Significant contributions to open-source projects, demonstrating strong math, engineering, statistics, or machine learning skills.

  • A strong track record of scholastic excellence.

Application Requirements


To apply to the 2018 Facebook AI Residency Program, you will need to complete the application and submit the following items:


  • CV/Resume (including links to GitHub, professional webpages, publications, or blogposts as applicable)

  • Personal statement

  • Academic grade transcript

Note: All materials must be in PDF format.


CV/Resume:


Please include details of: (i) research you have undertaken and publications that resulted; (ii) any Machine Learning competitions you participated in and their outcomes; (iii) details of significant coding experience and links to any open-source repositories. Please try to focus on impact.


Personal statement:


In a maximum of 2 pages, describe why you wish to participate in the program. Convey your previous experience in AI, interest in research, and long-term plans. We do not require a specific format, but encourage you to value readability (e.g. not go below 10 point fonts and 1 inch margins) and use your best judgment.


Grade transcript:


Include transcripts for all degrees completed. If applying from a non-US school, please append a conversion of your grades to US GPA equivalent (this tool may be helpful: https://www.foreigncredits.com/resources/gpa-calculator/, although this should not be considered an endorsement).


Important Dates


  • Deadline for applications: January 26, 2018

  • Notification of interview: February 16, 2018

  • Notification of admission: March 5, 2018

  • Deadline for offer acceptance: April 20, 2018

  • Residency Program start: August 2018

  • Residency Program end: August 2019

How to Apply
Interested and qualified candidates should Click Here to Apply





Jobs in Nigeria



Facebook AI Research Residency Program 2018